In the current TV market, smart TVs have attracted attention due to their powerful hardware and network resources. For Haier, the release of Haier Modular TV is a new attempt by Haier to the smart home and Internet industry. The first Haier Modular Card TV was released in January 2014. It is completely tailored to the needs of users in the Internet era and has given it distinctive Internet attributes. However, some users have reported that as the usage time becomes longer, Haier Modular Card TV will have a Caton problem when playing video and audio resources. In fact, Xiaobian thinks that this is only a problem in the network setting. So how do you set up the network? The following Xiaobian will introduce to you the Haier mode card television network setting method.
Haier Modular TV Network Setup General Steps
First, press "Home" button to enter the main interface, press the up, down, left, right button to select [System Settings].
2. Press “Confirm†to enter the sub-menu, press the up/down buttons to select [Network Settings], and then press the “Enter†button to enter.
3. Press the up or down button to select the network status, network connection, WiFi.Direct and WiFi hotspot settings.
network status
The current network connection status and detailed parameters are displayed, and the network type can also be switched.
Setting method: Press the right key to open the submenu, press the left or right key to select [Close Wi-Fi] or [Switch Network] item, and set the options.
Turn off Wi-Fi: You can turn the Wi-Fi module function on or off.
Switching the network: In the presence of both wired and wireless, the switching between wired and wireless can be performed. If there is a lack of both wired and wireless, the [Switch Network] item cannot be selected.
Internet connection
Displays the wired or wireless network connection information wizard, which can be set according to the system prompts.
First, wired network connection
You can choose to automatically obtain or manually connect the switching IP acquisition mode for wired network connection.
IP address auto-acquisition mode: In the automatic connection mode, the TV automatically obtains an IP address (the router is set to "Allow automatic acquisition"), and confirm the success by pressing the "Confirm" key.
Manually obtaining the IP address: In the manual connection mode, you need to set the network address. Press the up or down arrow key to select the input address and press the corresponding number key on the remote control to manually enter the network address. After the input is completed, select the "Next" button, press the "Confirm." button to confirm, save the user input IP address and other information.
Second, wireless network connection
Enter the wireless network interface, select a wireless network that needs to be connected, press “confirm†to confirm, the cursor will automatically move to “Nextâ€, and then press “confirm†to pop up the input password box. If the network is encrypted, please enter the password first. After entering the password, select "Next" and press "Confirm/" to connect directly.
Manually add a wireless network
1, enter the network connection interface, select the "search" button, press "confirm" key to enter the Wi-Fi network list.
2. Press Up or Down to select Add Network, press “Confirmâ€, the cursor will automatically move to “Nextâ€.
3. Press the “Confirm†button again to enter the network SSID, press the key to select the security, press the left or right key to select the security mode, enter the password, select “Next†and press the “Confirm†key to complete the addition.
Haier Modular TV Network Setup General Steps
First, press "Home" button to enter the main interface, press the up, down, left, right button to select [System Settings].
2. Press “Confirm†to enter the sub-menu, press the up/down buttons to select [Network Settings], and then press the “Enter†button to enter.
3. Press the up or down button to select the network status, network connection, WiFi.Direct and WiFi hotspot settings.
The current network connection status and detailed parameters are displayed, and the network type can also be switched.
Setting method: Press the right key to open the submenu, press the left or right key to select [Close Wi-Fi] or [Switch Network] item, and set the options.
Turn off Wi-Fi: You can turn the Wi-Fi module function on or off.
Switching the network: In the presence of both wired and wireless, the switching between wired and wireless can be performed. If there is a lack of both wired and wireless, the [Switch Network] item cannot be selected.
Internet connection
Displays the wired or wireless network connection information wizard, which can be set according to the system prompts.
First, wired network connection
You can choose to automatically obtain or manually connect the switching IP acquisition mode for wired network connection.
IP address auto-acquisition mode: In the automatic connection mode, the TV automatically obtains an IP address (the router is set to "Allow automatic acquisition"), and confirm the success by pressing the "Confirm" key.
Manually obtaining the IP address: In the manual connection mode, you need to set the network address. Press the up or down arrow key to select the input address and press the corresponding number key on the remote control to manually enter the network address. After the input is completed, select the "Next" button, press the "Confirm." button to confirm, save the user input IP address and other information.
Second, wireless network connection
Enter the wireless network interface, select a wireless network that needs to be connected, press “confirm†to confirm, the cursor will automatically move to “Nextâ€, and then press “confirm†to pop up the input password box. If the network is encrypted, please enter the password first. After entering the password, select "Next" and press "Confirm/" to connect directly.
Manually add a wireless network
1, enter the network connection interface, select the "search" button, press "confirm" key to enter the Wi-Fi network list.
2. Press Up or Down to select Add Network, press “Confirmâ€, the cursor will automatically move to “Nextâ€.
3. Press the “Confirm†button again to enter the network SSID, press the key to select the security, press the left or right key to select the security mode, enter the password, select “Next†and press the “Confirm†key to complete the addition.
We are saleing Membrane Switch For Schneider,provides the product information.
Membrane Switch for Schneider are widely used for medical and industrial equipment, research shows, machinery equipment, industrial control, man-machine interface, industrial automation integrated workstation, POS, CNC etc. we have a lot of membrane switch for Schneider, standing some of our inventory stock.
Membrane Switch for Schneider
Membrane Switch For Schneider,Membrane Keyboard For Schneider,Membrane Keypad For Schneider
GUANGZHOU VICPAS TOUCH TECHNOLOGY CO.,LTD , https://www.touchsuppliers.com