From the structure diagram we can see that the reset hole of the WE30 is located below the HDMI port and is very easy to find. After finding the reset hole, we first pull out the power cord and insert the pointed hard object such as a toothpick, paper clip, and pen tip into the hole and press and hold it.
At this time, the box is in the power-off state. Step 2: Connect the power cord to keep pressing, quickly connect the power cord, and after plugging in the power, keep pressing for two or three seconds and then let go. After releasing it, a few seconds later, the box will enter the reset screen.
At this point, the box will enter the strong brush state, according to the following steps:
1, select "wipe data/factory reset"
2, select yes--delete all user data
3, is clearing data
4, after the completion of the removal has been displayed in the lower left corner "Data wipe complete";
5. Select item 1 at this time: reboot system now, and the box will restart automatically.
After the restart, the box will enter the normal boot page, you can use ~ ~
LED underground lights embedded on the ground. Lighting the ground and vegetation on the ground can make the landscape more beautiful and safer for pedestrians to pass. LED energy-saving light sources are now mostly used. The surface is polished stainless steel or aluminum alloy panel, high-quality waterproof joints, silicone sealing ring, and tempered glass, which are waterproof, dustproof, leak-proof and corrosion-resistant.China underground factory price directly
Our other products range:LED Underground Light, LED Underwater Light , LED Wall Washer Light , LED Linear Light , LED Outdoor Flood Light, LED Garden Light , LED Landscape Light , LED Strip Light , Led Step Light etc.
Led underground Light,LED waterproof underground light,Outdoor IP68 underground Light,China underground factory
SHENGYA LIGHTING TECHNOLOGY CO., LTD. , https://www.syalighting.com