If you are afraid of watching television and spending money, what can you do to save energy?

With the popularity of smart mobile terminals, many young people begin to love watching TV less. TV at home has gradually become the main pastime for mom and dad. But mothers who have become a habit are always paralyzed when they watch TV, because she thinks watching television for too long will cost her electricity.

The fact is that TV's power consumption is not as much as mothers think, but in order for them to believe you, they need to tell her how to use this method to save power.

Sometimes the mother can't find the remote control directly to the TV power supply, in order to turn off the TV. We must remind my mother that suddenly pulling out the power plug will cause damage to the internal components of the TV and increase the power consumption of the TV. Therefore, when we turn off the TV, we should first turn off the TV with the remote control, then turn off the power and unplug the power plug.

Do not switch frequently

In order to save power, mothers always watch TV for a moment and turn off later. Mothers think that as long as the running time is short, the TV will save power. We must also remind mothers that the instantaneous power when the television is turned on is relatively high when the power is relatively stable. Therefore, frequent switching cannot be used to save power, and it is possible to shorten the service life of the TV and cause more harm than good.

Sound and picture adjusted to suitable

Some mothers' ears are not very sensitive, so they like to put television sounds very loudly; some mothers particularly like bright TV screens, so the brightness of television screens at home is particularly high. Here we should also remind mothers that it is not a good thing to have too loud voices and too bright images for hearing and vision.

In addition, each volume of the TV will increase the corresponding power consumption; and when the brightness of the TV screen is the brightest, it consumes about 60% more power than the most suggestive. Therefore, in order to save power and improve the health of eyesight, the TV screen will be adjusted when watching TV. To the right, do not be too bright.

Smart TV/box information can focus on smart TV information network sofa butler (http://), China's influential TV box and smart TV website, providing information, communication, TV boxes, smart TVs, smart TV software, etc. Answering questions.

Rack Mounted PLC Splitter

The PLC splitter is used to separate or combine optical signals. A PLC is a micro-optical component based on planar lightwave circuit technology and provides a low-cost light distribution solution with the small form factor and high reliability.

Rackmount Splitter is manufactured using silica glass waveguide circuits that are aligned with a v-groove fiber array chip that uses ribbon fiber. Once everything is aligned and bonded, it is then packaged inside a miniature housing. PLC splitter has high-quality performance, such as low insertion loss, low PDL, high return loss, etc.

Advantages
Suitable for multiple operating wavelengths (1260nm – 1650nm); unstinted.
Equal splitter ratios for all branches.
Compact configuration; smaller size; small occupation space.
Good stability across all ratios.

High quality; low failure rate.

Rackmount Splitter,Fiber Optical Splitter Rackmount,1U Rack Mount PLC Splitter,PLC Fiber Optical Splitter

Sijee Optical Communication Technology Co.,Ltd , https://www.sijee-optical.com