Di-Direction Manual Swipe Magnetic Card Reader Module

Model NO.: WBR-1000
Function: Payment
Structure: RFID Card
Data Transmission Mode: Single Tracks
Application Field: Fiscard
Size 1: 43*23*23mm
Size 2: 90.5*21*24mm
Size 3: 90*24*24mm
Size 4: 43*16*22.5mm
Trademark: WBE
Transport Package: Carton
Origin: Shenzhen
HS Code: 8470900090

1.Overview

WBR-1000 series is a set of manual swipe type modules that read magnetically encoded data from magnetic stripes that
conform to ISO standards and decode them to CLS, RCL and RDT

2.Features

2.1 3-Dimensional Head Mounting Design achieves Optimal Adhesion with Minimal Wear.
2.2 Universal Head Mounting makes Switching between Tracks Quick and Easy.
2.3 Spring and steel axis-Action Card Guidance System aids Simple and Compact Structure.
2.4 Custom Ics provide 24% Jitter compensation over a Wide Range of Card Feeding Speeds.
2.5 High Coercive Magnetic Stripe up to 3,500Oe can be read.

3. Enviroment Requirement

Operating Temperature : -10°C ~55°C
Storage Temperature : -30°C ~ 70°C
Vibration  Amplitude : 2mm , 2 G , 10-55Hz/min in x,y,z direction
Shock Resistance : Up to 30 G, 11 msec
Input Current : 25mA
Output Current : Less than 7mA
 
4.Specifications
 
Function
Interface TTL 
Decoder F/2F 
Operation speed  15-120 cm/sec (6-50inch/sec)
Operation place Indoor  
Identify efficiency Above 99.5% 
Error rate Less than 0.5%(JSE test card)   
Recording density 210 BPI 75 BPI 210 BPI   
Card
Card standard ISO 7811/2  
Track I(IATA), II (ABA), III (MINTS)  
Track location ISO1 (IATA), ISO2 (ABA), ISO3 (MINTS)
Card thickness 0.76 ± 0.08 mm   
Track width  1.5mm 
Head life At least 500,000 times 
Power
Voltage  3.0~5.5V DC   
Current Less than 2.0mA (Single Track), 5mA (Dual Track), 7mA (Triple Track)/5V   
Fluctuation Less than 50mVp-p
Environment
Operate temperature and humidity  -10°C~50°C,  20~90% RH 
Storage temperature and humidity  -30°C~70°C, Less than 95% RH
Physical characteristics
Weight Approx. 45g

 
Model Table
 

MODEL		 DIMENSION (mm) ISO TRACKS
W*L*H SINGLE DUAL TRIPLE
I II III I & II II & III I & II & II
WBR-1500 16*43*22.5 1510 1520 1530 1550 1560 1570
WBR-1400 24*90*24 1410 1420 1430 1450 1460 1470
WBR-1200 21*90*24 1210 1220 1230 1250 1260 1270
WBR-1A00 23*43*23 1A10 1A20 1A30 1A50 1A60 1A70

 
5.Application:

POS terminal   
Access control  
Time attendance   
Membership system  
6.Picture





 

IP65 Waterproof Membrane Switch

Waterproof Membrane Switch is mainly characterized by coating a waterproof insulation layer on the conductive line surface so that the conductive line does not directly contact the pressure sensitive rubber layer. In addition, no holes shall be opened within 5m/m of the distance between the up-and-down road surface and the conductive line, and the interlayer air holes shall not be communicated with the outside world. Thus, the insulation resistance drop of conducting circuit caused by the moisture absorption of rubber layer and the impregnation and penetration of water into the circuit are improved. Therefore, it has the advantages of good waterproof and moisture-proof performance. Therefore, not waterproof membrane switch is not with the above requirements, but also can not have waterproof performance. The waterproof film switch has the characteristics of: the use of high-performance waterproof material processing, so that the product is used in 95% of the wet environment. No worries about rain, can be used in harsh conditions.

Ip65 Waterproof Membrane Switch,Silicone Membrane Keypad,Up And Down Membrane Keypad,3Pin Terminal Membrane Keypad

Dongguan Nanhuang Industry Co., Ltd , https://www.soushine-nanhuang.com

Posted on