(Note: The model at the bottom of the box is inaccurate. Open the box setting before cracking the box -- About this machine, determine the final model of the box. Applicable models: Huawei Wyatt Boxes EC6108V93/94/97, EC6108V9C, EC6108V9U-pub, EC6108V9-pub; Not applicable models: CA version, 9E/9I version Brush risk, your own risk! Firmware download: 1. Wired & Wireless is available with a streamlined firmware link: http://pan.baidu.com/s/1c2B5xLI Password: pz5k; 2. Some models can not be wired with a firmware link: http://pan.baidu.com/s/1nuS7Gm9 Password: yxyq 3. ADB opens, has ROOT firmware link: http://pan.baidu.com/s/1eSgZkuI password: jpsb Tips: Need to see IPTV users do not brush, keep IPTV cracking method: 1. Huawei Wyatt V9_V9U_V9E_V9A_V8 fool tutorial: http://bbs.shafa.com/thread-1334755-1-1.html 2. U disk crack: http://bbs.shafa.com/thread-1415320-1-1.html Method 1: REC Brush Upgrade Preparation Tool: U disk, computer, third-party firmware; Steps: 1. Download the third party compact firmware package (downloadable at the end of the post), download address: 2. Create a new folder "upgrade" on the root directory of the U disk, copy the update.zip file to this folder, and insert the box USB interface after the completion, as shown in the following figure. U disk must be FAT32 format, if not reformat, as shown below, 3. Enter the REC interface, there are two ways to choose one of them (1) The box is powered off, and the power is turned on at the same time. Press the red button in the upper right corner of the remote control at the same time. Note that pressing the red button on the remote control is not pressed. By pressing the button, the system will enter a full English rec interface and enter this interface to stop the remote control. (2) In July 2017, the new version of rec will be tested with the left and right arrow keys. Open REC interface detailed tutorial: http://bbs.shafa.com/thread-1418349-1-1.html 4. After entering REC, select "apply update from external storage" and press OK to confirm; 5. After waiting a few minutes, the box is automatically restarted after the upgrade is completed. The first boot time after the brush is longer, waiting about five minutes; Method 2: STB Connection Upgrade Applicable Models: The system cannot enter REC and can open the remote interface Preparation tools: computers, boxes; Steps: 1. On the computer to download a good brush package, update compression package without decompression; 2. Refer to the fool-style cracking tutorial (http://bbs.shafa.com/thread-1334755-1-1.html), the computer connects to the box through the STB until the words "partly successful" appear in the lower right corner; 3. Click on the "upgrade" STB management tool; 4. Click "Browse" to find the previously downloaded firmware package and click "Open"; 5. Click "Upgrade" on the interface. 6. Start transferring firmware to the box, wait for the progress to reach 100%, restart the box, enter the upgrade interface, and restart after rebooting to enter the new system; After downloading, you can download and install various live and on-demand applications from the sofa butler