Round and Rectangular Electro Holding Magnet

Round and Rectangular Electro Holding Magnet
General Description
For this DC holding magnet system, the magnetic holding effect only occurs on power up. The operating voltage is 24V. The switch-on duration can be 100%, the holding discs are supplied with free wire end. The magnetic holding rails with two open connection screws

Features:
1. Automatic or manual operation.
2. Coils are continuously rated at the specified voltages.
3. Use over size armature to ensure magnet face is fully covered.
4. Idea for use in machine mechanisms, door/guard locking and applications with remote hold/release requirement.
5. Optimum performance when used with RS armature plates (available separately) but suitable for holding any smooth ferrous surface of adequate thickness
6. Electrical connection bu free leads (FL), terminal block (TB) or plug and connector (PC).
7. Remanence (approx. 5% of holding force) may be reduced by fitting a non-magnetic shim between magnet and armature





For more detail info, please feel free to visit our website or inquire us at any of your convenience

Ying Jun
Senior technical manager                       
Yuxiang Magnetic Materials Ind. Co., Ltd
Add: Floor 16, Jinyuan plaza, # 57 Hubin Nan Road, Xiamen, China 361004
Mobile: +86
TEL:/2217138
FAX: 
(E-mail): mag(a)e-magnet(.)cn