Millet box to quickly remove the boot advertising tutorial

My device is enhanced version of millet box 3, system version v1.4.15 (stable version). In theory, all versions of this tutorial can be used universally.
Original tutorial, reproduced please inform


The final effect: press the power button for 2 seconds to enter the desktop, remove the boot ads permanently! ! The actual measurement does not have any adverse effect on the system.
It is strongly recommended to replace the default desktop with the tutorial I sent before, to bid farewell to the annoying opening of the software and the cumbersome operating logic of the millet box, and also to have a millet box that is easy to operate and clean without any millet implants! Http://bbs.shafa.com/thread-1323627-1-1.html
Let's talk about the logic of unlocking bootable advertisements (which is irrelevant to the tutorial): As we all know, the 'shutdown' of a TV box is not a power off, but a standby lock screen similar to a mobile phone, so the so-called 'boot' process should be very Quickly right, however, millet forced to display more than ten seconds of advertising, allowing users to do more unnecessary to wait. So I think, since it is the system that forces the display of advertisements at boot time, then it is definitely necessary to run an application process. So I went to the 'Running' column in the Android Settings (non-millet box settings) to find all the running programs, forcibly stop some suspicious application processes, and then turn off the computer and still display ads, but! The vast majority of processes I had stopped before had no longer automatically restarted. After repeated verification, I discovered that a process with a "StandbyCover" was still perseveringly restarting, and I judged that this process was the source of the boot advertisement. "! !
Here are the tutorial steps:
1, need U disk, the "lucky cracker" download (download link: http://bbs.shafa.com/thread-1323864-1-1.html), into the U disk. 2. Open the box settings and open the option to allow the installation location source. To facilitate the operation, it is best to use the remote control on the mobile phone software 'Screenshot Artifact' to set the mouse mode to operate the following steps. Insert the U disk, install the lucky cracker to open, this will prompt whether to give lucky cracker permissions, click 'Yes', prompt time limit 30 seconds, too late to enter the root software to give the lucky cracker permissions.
3, enter the lucky cracker, click on the lower left corner of the 'filter list', and then click on the 'upper' in the upper right corner, select 'system applications' --- click on the application.
4, then in the list to find "StandbyCover" (see clearly), click to expand, see the expanded list of 'application information' - 'start the application' - 'crack menu' - 'toolbox' and so on, select the tool The box opens, select the first 'disable application (freeze)' and freeze the 'StandbyCover'.
5, and then find the "StandbyCover" again in the list of lucky crackers, you will find the StandbyCover icon becomes a key with a fork, then it has been successful.
6, everything is off, how do you turn off the power will no longer show boot advertising!

Here are some small details:
1. If you are idle for a while and want to see advertisements, re-enable the StandbyCover in the lucky cracker.


Watch Screen Protector

Watch Screen Protector,Watch Film Protector,Smart Watch Screen Protector,Hd Watch Screen Protector

Shenzhen Ruidian Technology CO., Ltd , https://www.wisonen.com

Posted on