In order to standardize and strengthen the renewal registration management of electrician's network entry operation licenses, according to the "Administrative Measures for Electrician's Access Network Operation Permits" (Order No. 15 of the Electricity Regulatory Commission) and other related regulations, the "Electrical Access Network Operation Permit" is now continued. The registration procedures will be issued to you. Please follow the implementation. If you have any problems during implementation, please report to the Qualification Management Center.
Annexed April 24, 2012:
The first article of the renewal registration procedures for electrician's network entry licenses is to standardize and strengthen the renewal registration management of electrician's network entry operation licenses. These measures are formulated in accordance with the relevant provisions of the â€œAdministrative Measures for Electrician's Access to Network Operation Licensesâ€ and other relevant regulations.
Article 2 These procedures shall apply to the application, acceptance, review and decision of the renewal registration of the electrician's network entry permit.
Article 3 The State Electricity Regulatory Commission (hereinafter referred to as the Electricity Regulatory Commission) is responsible for guiding and supervising the renewal registration of the national electrician's network access operation permit (hereinafter referred to as permit).
The agencies dispatched by the SERC (hereinafter referred to as the dispatched offices) are responsible for the registration of renewal of licenses within their respective jurisdictions.
Article 4 The permit shall be subject to the registration management system. The electrician shall enter the network with a registered permit.
Article 5 The period of validity of the renewal of the license is three years, starting from the actual registration date.
Article 6 When the validity of a license registration expires, if a certificated electrician needs to continue to engage in network access operations, it shall, within 30 days prior to the expiry of the registration period, submit a renewal to the issuing authority that issued the permit or the dispatched office as prescribed in Article 14 of the present Measures. Registration application.
If the expiration of the validity period of the license registration does not involve renewal of registration, it shall not engage in network access operations.
Article 7 Where a certificated electrician has applied for renewal of registration within the prescribed time limit, it shall pass the actual operation assessment organized by the dispatched organization and obtain relevant certification materials for examination.
Article 8 A certificated electrician applying for renewal of registration shall meet the following requirements:
(1) Men are less than 60 years old and women are less than 55 years old;
(2) It is healthy and has no diseases or physical defects that hinder the operation of the network;
(c) Complete continuing education in accordance with regulations.
Article 9 When applying for renewal of registration, a licensed electrician shall provide the following materials:
(1) The electrician's network entry permit;
(2) Examination form for the application for renewal of registration of electrician's network entry permit (see attachment), which includes the behavior records of the electrician's network entry operation, continuing education, and assessment records;
(c) Medical examination results provided by hospitals above grade two.
Late applications for renewal of registration should also provide evidence of actual operational qualifications.
The record of network operation behavior is confirmed by the employer. In accordance with the conditions stipulated by the dispatched agency, the certificated electrician who has a part-time job at two or more power user units shall obtain confirmation from each unit.
The certificated electrician shall be responsible for the authenticity and completeness of the contents of the submitted application materials, and shall not provide false application materials or conceal the relevant circumstances.
Article 10 The dispatched office shall make a decision on whether to grant the renewal of registration within 15 days from the date of receipt of the renewal application for registration.
If a decision to grant a renewal of registration is made, the renewal registration procedure shall be completed. In the case of a decision not to renew the registration, the applicant shall be notified in written form stating the reason for not renewing the registration and informing them of their right to apply for administrative reconsideration or to initiate an administrative lawsuit according to law.
The dispatched office shall record the registration information in the electrician management file.
Article 11 After an electrician obtains a license and increases the type of license, the validity period of the license renewal registration shall be recalculated from the date of the decision on the new category of license.
Article 12 During a registration period, an electrician who obtains a low-voltage permit and an electrician who obtains a license of another class (including two or more categories) shall receive no less than 24, respectively, according to the continuing education approved by the SERC. One school hour and thirty-six hours of continuing education.
Article 13 Licensed electricians may receive continuing education through face-to-face education, aerial classes, and distance education.
Article 14 Where the work place of a licensed electrician changes to a place outside the issuing institution that issues the permit, it may apply to the dispatched office at the place of work for renewal of registration. The dispatched office that accepts the application shall check the information of the electrician's file and apply for the renewal of registration in accordance with regulations.
Article 15 An employing unit shall not arrange an electrician who has not registered for renewal within the prescribed time limit to engage in network access operations.
Where a certificated electrician or employing unit violates the relevant provisions of these Measures, the dispatched office shall handle it in accordance with the "Administrative Measures for the Electrician's Access to Network Operational License" and the relevant state regulations.
Article 16 If the staff of the State Electricity Regulatory Commission and its dispatched offices abuses their powers, neglects their duties, engages in malpractices for personal gains during the renewal registration management of electrician's network entry permits, they shall be given administrative sanctions in accordance with the law, and if they constitute a crime, they shall be investigated for criminal responsibility according to law. .
Article 17 These Measures shall come into force as of the date of promulgation.
Application for renewal registration of electrician's network operation license
Name Gender Date of Birth 1 inch Exemption Face Color Close-up ID Number Contact Number Contact Telephone Issuing Authority Permit No. Registration Validity Employer Good Health () Other () Information Description:
Application for Renewal of Registration Permit Category High Pressure () Low Pressure ()
Special Category: Cable Profession () Relay Protection Profession () High-Pressure Test Profession ()
Whether or not an illegal operation occurred after the previous registration of the online operation behavior record. Accident: No () Yes ()
Description of the situation:
Continuing education and assessment records on year, month and month (checked by the assessment unit)
Date of Applicant's Signature on the Year, Month, Date, Day Accepted by the Applicant Time Review Comments: 1. The applicant can manually fill in the form or print out the electronic document. Hand-filled, using blue or black pens, pens written in Chinese. If some columns do not need to be filled in, please fill in the blanks in the column.
Second, in addition to special requirements, the table needs to fill in the contents of the figures, fill in the Arabic numerals. In the item with "()" in the table, the applicant has "âˆš" in "()" after the option matching his own situation.
Third, the "employers" column to fill in the requirements. Under normal circumstances, fill in the name of the labor contract unit signed with the applicant; if it belongs to the case of labor dispatch, fill in the name of the labor unit; if it meets the conditions stipulated by the dispatched office, and fill in the positions of the units with more than two power user units.
Fourth, the "health status" column fill in requirements. Fill in according to the applicant's physical condition. If there is a serious illness or disability that is healthy or has no effect on the operation of the network, â€œâˆšâ€ shall be designated within â€œ()â€ after â€œgoodâ€; otherwise, â€œâˆšâ€ shall be designated within â€œ()â€ after â€œotherâ€. And indicate the serious illness or disability in the â€œcondition statementâ€. He shall not be allowed to renew the electrician's network operation license for serious diseases such as organic heart disease, epilepsy, Meniere's disease, vertigo, rickets, paralysis, mental illness, dementia, and nervous system diseases affecting physical activity. registered.
V. Fill-in requirements for the â€œIntake Network Operation Recordâ€ column. This column is divided into two parts. The first half is filled in by the applicant. If an accident that violated the regulations was found after the last registration, the situation is described in the â€œInstructionsâ€. In the second half, the employer fills in the comments and seals them.
6. Fill in the "Continuing Education Situation and Assessment Record" column. The assessment unit shall fill in and stamp the seal. The content shall include the applicant's method of continuous education, academic hours, and assessment opinions. The assessment opinion shall be â€œpassed assessmentâ€ or â€œnot passed assessmentâ€.
7. In addition to completing this form, the applicant must also provide the following materials:
1, electrician's network operation permit;
2. Medical examination results provided by hospitals above Grade 2;
3. If the application for renewal of an application is overdue, it shall also provide the actual proof of the actual operation assessment.
8. When making a decision to grant a renewal of registration, fill in the registration time and expiration date in the â€œTimeâ€ column on the â€œRegistrationâ€ page of the license paper certificate. Fill in the name of the electrician employer in the â€œRegistration Unitâ€ column. Register a special seal; if you hold an IC card, write the corresponding registration information in the license.
9. Applicants must read the instructions carefully, fill in the form truthfully, and sign the â€œSignature of the Applicantâ€ column.
National Electricity Regulatory Commission
The concept of strong electricity is relative to weak electricity. Strong and weak currents are separated by voltage. The working voltage is more than 24V AC is strong, and the following is weak. Strong wires generally refer to transmission wires with an AC voltage of more than 24V. Such as home lights, sockets, etc., the voltage is 110 ~ 220V. Strong wires can also affect nearby communication lines. The following describes the knowledge of strong wire protection.
(1) Different AC frequencies
The frequency of strong electricity is generally 50Hz (Hz), which is called "power frequency", which means the frequency of industrial electricity: the frequency of weak electricity is often high frequency or ultra-high frequency, measured in KHz (kilohertz) and MHz (megahertz).
(2) Different transmission methods
Strong electricity is transmitted on transmission lines, and weak electricity transmission is divided into wired and wireless. The radio transmits electromagnetic waves.
(3) Different power, voltage, and current
Strong electric power in KW (kilowatts), MW (megawatts), voltage in V (volts), KV (kilovolts), current in A (ampere), kA (kiloampere); weak electric power in W (watts) , mW (milliwatts), voltage in V (volt), mV (mV), current in mA (milliampere), uA (microampere), so its circuit can be printed circuit or integrated circuit composition.
There are also high-frequency (hundreds of KHz) and medium-frequency devices in high-voltage power supplies, but the voltage is high and the current is large. Due to the development of modern technology, weak electricity has penetrated into the field of strong electric power, such as power electronic devices, wireless remote control, etc., but these can only be regarded as the weak electric control part in strong electric power, and it is still different from the controlled strong electric power.
According to the basic principle of weak electricity transmission signals and strong electric conduction, we can easily distinguish between strong electricity and weak electricity. For example, although electric shavers, flashlights, etc., use only two dry batteries (3V), we cannot think that they are weak because the voltage and current of the appliances are small, because they conduct electricity rather than signals, so they should be classified as strong. class.
From the above description, the relationship between the four can be roughly stated as follows:
High voltage must include strong electricity, and high voltage does not necessarily belong to high pressure.
Low voltage must include weak electricity, weak electricity must belong to low pressure;
Low voltage is not necessarily strong, and strong power is not necessarily low pressure.
The use of strong electricity
Strong electricity generally refers to the mains power system\lighting system and other power supply and distribution systems, including air conditioning lines, lighting lines, outlet lines, power lines, high-voltage lines and the like. There are two types of weak electricity: one is the state-designed safe voltage level and control voltage and other low-voltage electric energy, and there are AC and DC points, such as 24V DC control power supply, or standby power supply for emergency lighting. The other is information sources that carry information such as voice, images, and data, such as audio, video lines, network lines, and telephone lines. DC voltages are generally within 36V. Electrical appliances such as telephones, computers, televisions (cable television lines), audio equipment (output lines), broadcasting systems, and building automation (such as access control and security) in household electrical appliances are all weak electrical equipment.
In power systems, voltages below 36V are called safe voltages, voltages below 1kv are called low voltages, voltages above 1kv are called high voltages, and lines that directly supply power to users are called distribution lines, such as user voltages are 380/220v, It is called a low-voltage distribution line, which is the strong electricity in home decoration (because it is the highest voltage for home use). Strong electric generally refers to direct current voltage above 24V. Such as home lights, sockets, etc., voltage 110V ~ 220V. Electrical appliances for home lighting, electric water heaters, heaters, refrigerators, televisions, air conditioners, audio equipment, etc. are all electric equipment.
High Current Cable,Pvc Insulated Copper Core Wire,Bvr Electric Cable,Bv Power Cable
Jiangsu QiSheng Cable Co., Ltd. , https://www.shuaihe-cable.com