Shunde won the Honghai LED lead frame big order, want to expand production and increase production capacity

Topic: Industry Recently, Hon Hai Group's advanced development optoelectronics began to place orders. The average monthly shipment amount exceeded NT$20 million and increased month by month. Shunde Industrial (2351) layout LED lead frame won this big order. It is reported that in order to cope with the growth of orders, Shunde expects to more than double the production capacity of LED lead frames before the end of the year.

2010 is the year of LED TV's take-off. Shunde's LED TV market is expected to exceed 35 million units in 2010. With the LED lighting era coming, the LED industry is expanding rapidly.

At this stage, the main customers of Shunde LED lead frame, in addition to advanced power, there are Lite-On and Japan Sharp. The proportion of LED lead frames in Shunde's electronics business has increased from 5% at the beginning of this year to around 7% in March. At present, Shunde Taiwan factory has 19 LED lead frame production lines, the capacity utilization rate is about 70%, with the advanced power orders blessing, Q2 is expected to be fully loaded.

Chen Chaoxing, deputy general manager of Shunde, said that Shunde has planned to add at least 11 more production lines this year, for a total of 30 production lines. At that time, the monthly shipments will reach 80 million yuan, accounting for about 15% of the electronics industry.

Vibration Motor:

Is mainly used for adult health care products and toys micro vibration motor is a Dc Motor, the motor shaft with an eccentric wheel, when the motor rotation, eccentric circle particle is not turn the heart of the motor, make motor is constantly out of balance state, caused by inertial effect.


Characteristics: small volume, strong vibration;


Features: small size, fast speed, stable performance, low price, can use battery drive,Can change the different materials of the pendulum head
Vibration Motor  Vibration Motor
Method of use: the best stable in horizontal plane, installed on the dc vibration motor  output shaft parts, cannot use a hammer to knock, knock prone to press into the dc vibration motor  drive, may cause damage to internal components, and cannot be used in the case of blocked.

vibration motor

Operating temperature range:

vibration motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a vibration motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.


Storage temperature range:

vibration motor  should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.


Service life:

The longevity of vibration motor  is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.


●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.


when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.

vibration motor

Vibration Motor

Vibration Motor,Small Powerful Vibration Motor,220V Vibration Motor,Electric Motor For Vibrating

Shenzhen Shunchang Motor Co., LTD. , http://www.scgearmotor.com

Posted on